Weather - Resistance Glass Silicone Sealant Organic Non - Pollution AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Weather - Resistance Glass Silicone Sealant Organic Non - Pollution

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Weather - Resistance Glass Silicone Sealant Organic Non - Pollution

Characteris

Weather - Resistance Glass Silicone Sealant Organic Non - Pollution

Characteristics:

One component, RTV-1, Neutral Curing at room temperature, high strength silicone structural sealant.

Excellent weatherproofing performance, shelf life reaches over 30 years in general weather condition.

No need to prime coated, excellent joint to most building material.

Excellent compatibility with other neutral silicone sealant.

Main uses:

For glass, aluminum alloy, plastic steel windows and doors, ceramic, non assembly oily Wood etc.;
Powder coated aluminum must be solvent completely remove wax coating.

Construction Guide:

Must use solvents such as toluene or acetone, keep the interface clean and dry. As to the use of a primer to enhance its adhesion, when the primer is dry before construction. Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites in need, but make sure the tape not to touch the surface of construction will be. Before the gum is solidified, trimming immediately, in order to achieve the beautiful appearance.

Glass joint :

Restrictions:

When the surface of the material at the temperature above 40 Degree ,can't be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.

Main Technology Data: Standard: GB/T14683-2003

NO.	Item	Data
1	Type	Acetoxy
2	Density g/cm3	0.98
3	Capacity movement	±30%
4	Skinning time	5-15 minutes
5	Drying time(2mm/h)	8-10
6	Drying(4mm/h)	18-22
7	Max. Tensile strength	1.3
8	Hardness shore	21±2
9	Elongation at Break(%)	≥500
10	Modulus Mpa(100%)	0.60
11	Application temperature	-20 to +40
12	Temperature resistance	-50 to +100
13	adhesive	OK
14	Weatherproof	OK
15	Cold-hot adhesive	OK
16	Under water adhesive	OK
17	Elastic Recovery Ratio	96
18	Mass-loss Rate	35
Skin drying time and fully drying time under: 23 and 50% humidity

Construction Method:
Please do adhesion test or compatibility test to assure the applicability of product;

Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured; Please keep ventilate for the construction site.

Safety
Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate; Silicone sealant will not release any harmful substance and not be harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;

Warranty
As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.

Useage: