Anti - Cold All - Glass Silicone Aquarium Sealant Heat Proof AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Anti - Cold All - Glass Silicone Aquarium Sealant Heat Proof

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Anti - Cold All - Glass Silicone Aquarium Sealant Heat Proof
&nb

Anti - Cold All - Glass Silicone Aquarium Sealant Heat Proof

Features

Good cohesiveness for glass ; Excellent weathering resistance, resistance to ultraviolet radiation, ozone resistance, water resistance; Outstanding High and low temperature resistant performance , Still not brittle, hardening or cracking After curing under the low temperature of 50 , Will not become soft, degradation, and always maintain good strength and elastic at + 150 high temperature .

Main Purpose:

Use for structure's assembly of glass curtain wall. It can sealing the glass and metal's surface to a single assembly components directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design; It's suitable for the insulating glass structural's second layer's sealing. The site that particularly high requirements on the sealing performance, and multi-purpose;

Restriction of Usage:

Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilatedplaces, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

Main Technology Data:

Testing Item		Standard
Sagging degree	Vertical place, mm	≤3
Sagging degree	Horizontal Place	Not change shape
Extrusion performance, s		≤10
Tack free time		≤3
Hardness, hsA		20~60
The Tensile property(MPA)at 23 Tensile strength in adhesion(%)		≥100
Tensile strength in adhesion, Mpa	Normal condition	≥0.60
	90	≥0.45
	-30	≥0.45
	After founder	≥0.45
	Tensile property(MPA)after flooding and UVA irradiation	≥0.45
	bond damage area,%	≤5
Thermal aging	Thermogravimetry(%)	≤10
	Chap	No
	pulverization	No

Standard: GB16776 - 2005

Jointing show:

Estimated amount of use: Please see following form of estimated amount of various joints:

Specification	Width(6mm)	Width(9mm)	Width(12mm)	Width(15mm)	Width(18mm)	Width(21mm)	Width(24mm)
Thickness(6mm)	Length(8.3m)	Length(5.5m)	Length(4.2m)	Length(3.3m)	Length(2.8m)	Length(2.4m)	Length(2.1m)
Thickness(9mm)		Length(3.7m)	Length(2.8m)	Length(2.2m)	Length(1.8m)	Length(1.6m)	Length(1.4m)
Thickness(12mm)			Length(2.1m)	Length(1.7m)	Length(1.4m)	Length(1.2m)	Length(1.0m)

Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.