Room Temperature Vulcanizing Silicone Sealant Adhesive For Engineering AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Room Temperature Vulcanizing Silicone Sealant Adhesive For Engineering

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Room Temperature Vulcanizing Silicone Sealant Adhesive For Engineering

<stro

Room Temperature Vulcanizing Silicone Sealant Adhesive For Engineering

Features
One-component, neutral curing at room temperature, excellent construction silicone sealant; Excellent weather resistant, service life near 30 years under normal climate conditions. No need any base coating under normal conditions. Good adhesion for most building materials; Good compatibility with other neutral silicone structure sealant.

Main Purpose:
1,The assembly of glass curtain wall engineering.
2,It can be paste to one single assembly of the glass and metal surface directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design;
3, It’s suitable the second bonding of Low-E glass’s structural seal.
4,The site that particularly high requirements on the sealing performance, and multi-purpose;

Restriction of Usage:
Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

Main Technology Data:

Performance		Standard	Measured Value	Testing Method	Performance	Standard	Measured Value	Testing Method
Slumpability	Horizontal	Not change shape	Not change shape	GB/T 13477	Tensile proper(MPA)at 90	≥0.45	0.87	GB/T 13477
Slumpability	Vertical(mm)	≤3	0	GB/T 13477	Tensile proper(MPA)at 30	≥0.45	1.65	GB/T 13477
Pot life when 20Mins		≥10	3.3	GB/T 13477	Tensile proper(MPA)after flooding	≥0.45	0.99	GB/T 13477
Skin time(Hours)		≤3	1.2	GB/T 13477	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Hardness (HsA)		20-60	43	GB/T 531	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Thermogravimetry (%)		≤10	4.2	GB/T 16776	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Tensile proper(MPA)in standard condition		≥0.60	0.99	GB/T 13477	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Storage	9 months shelf life if stored below 27 in cool and dry place after production.

Standard: GB16776 - 2005

Estimated amount of use: Please see following form of estimated amount of various joints:
The length of "High performance neutral silicone structure sealant " can be extrude during application.

Specification	Width(6mm)	Width(9mm)	Width (12mm)	Width(15mm)	Width(18mm)	Width(21mm)	Width (24mm)
Thickness(6mm)	Length(8.3m)	Length(5.5m)	Length (4.2m)	Length(3.3m)	Length(2.8m)	Length(2.4m)	Length (2.1m)
Thickness(9mm)		Length(3.7m)	Length (2.8m)	Length(2.2m)	Length(1.8m)	Length(1.6m)	Length (1.4m)
Thickness(12mm)			Length 2.1m)	Length(1.7m)	Length(1.4m)	Length(1.2m)	Length (1.0m)

Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.

Joint show: