|
Foshan shunde kaya silicone co. ltd
|
Gold Index: 7319
300ml Stone Silicone Sealant Neutral Fast Curing For Metal Ceramics
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
300ml Stone Silicone Sealant Neutral Fast Curing For Metal Ceramics
<
300ml Stone Silicone Sealant Neutral Fast Curing For Metal Ceramics
Features
Single component, neutral curing, high modulus, fast curing speed.Good adhesive capacity on many base material, having excellent weatherability and resistance.Can be applied in any season and easy to apply.
High bonding strength, non-corrosive, have a strong seal with the majority of construction materials.
Application
1, Use for dry hanging stone curtain wall engineering and precast cement engineering joint sealing.
2, Use for the bonding and sealing of ceramics engineering.
3, Use for stone and other materials such as glass, metal, plastic joints sealing.
Construction Guide:
1, Must use solvents such as toluene or acetone, keep the interface clean and dry.
2, As to the use of a primer to enhance its adhesion, when the primer is dry before construction. 3, Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites in need, but make sure the tape not to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to achieve the beautiful appearance.
Restrictions:
When the surface of the material at the temperature above 40 , can't be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.
Specification:
|
NO. |
Item |
Data |
|
1 |
Material |
silicone |
|
2 |
Density (g/cm3) |
0.94 |
|
3 |
Capacity movement |
±30% |
|
4 |
Skin form time |
8-10 minutes |
|
5 |
Curing Rate (2mm/h) |
6-10 |
|
6 |
Drying (4mm/h) |
24-28 |
|
7 |
Max. Tensile strength |
1.3 |
|
8 |
Hardness shore A |
22±2 |
|
9 |
Elongation at Break (%) |
≥600 |
|
10 |
Modulus Mpa (100%) |
0.55 |
|
11 |
Application temperature |
-20°C to 40°C |
|
12 |
Temperature resistance |
-50°C to 100°C |
|
13 |
Weatherproof |
OK |
|
14 |
Under water adhesive |
OK |
|
Skin drying time and fully dry
Foshan shunde kaya silicone co. ltd [China (Mainland)]
Business Type:Manufacturer | ||
