Engineering Neutral Silicone Sealant Neutral Curing Heat Resistant

Features 

1, One-component, neutral curing at room temperature, excellent construction silicone sealant;
2, Excellent weather resistant, service life near 30 years under normal climate conditions.
3, No need any base coating under normal conditions. Good adhesion for most building materials;
4, Good compatibility with other neutral silicone structure sealant.
 
Main Purpose: 

1, The assembly of glass curtain wall engineering.
2, It can be paste to one single assembly of the glass and metal surface directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design;
3,  It’s suitable the second bonding of Low-E glass’s structural seal.
4, The site that particularly high requirements on the sealing performance, and multi-purpose;
 
Restriction of Usage:

 Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.
 
Main Technology Data:

 
Standard: GB16776 - 2005
 
Estimated amount of use: Please see following form of estimated amount of various joints:
The length of "High performance neutral silicone structure sealant " can be extrude during application.

Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.
 
Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.
 
Joint show:

 

 Mr. Daphne Ho

Tel: 86-757-29261001

Contact to this supplier