Post Offer Free
Foshan shunde kaya silicone co. ltd  

Gold Index: 7314

You are here: home  > OEM Acetoxy Silicone Sealant For Insulating Glass Non - Toxic

OEM Acetoxy Silicone Sealant For Insulating Glass Non - Toxic 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: AIA-1

OEM Acetoxy Silicone Sealant For Insulating Glass Non - Toxic
 
Characteristics:


OEM Acetoxy Silicone Sealant For Insulating Glass Non - Toxic

 

Characteristics:

 

Base :Silicone, neutral room temperature curing;  acetic acid type room temperature curing. Size: 300ml / 260ml / 220ml / 280ml, Container Type: Tube , Color: transparency , Specific Gravity: 0.94 , Performance Temperature:  Range: lower 6 or higher than 40 , Substrates: Most glass, aluminum alloy, plastic steel windows and doors, ceramic, non assembly oily Wood etc. Powder coated aluminum must be solvent completely remove wax coating. Full Cure: 24 hours. Application Time: 30 minutes. Application Temperature Range: Neutral room temperature , Characteristics : Will not shrink or crack , Weatherproof / Mildew Resistant , 30 minutes Tack free time, For Use with : Standard Caulk Gun , Basement Applications and multi-purpose , Storage : 9 months shelf life if stored below 27 in cool and dry place after production;  Outstanding weather resistance, long service life, easy to operation, super strong adhesion , high quality and reasonable price 

Outstanding weather resistance, long service life, easy to operation, super strong adhesion , high quality and reasonable price

 

Main uses:

For glass, aluminum alloy, plastic steel windows and doors, ceramic, non assembly oily Wood etc.;
Powder coated aluminum must be solvent completely remove wax coating.

 

Construction Guide:

Must use solvents such as toluene or acetone, keep the interface clean and dry. As to the use of a primer to enhance its adhesion, when the primer is dry before construction. Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites  in need, but make sure the tape not to touch the surface of construction will be. Before the gum is  solidified, trimming immediately, in order to achieve the beautiful appearance.

 
Glass joint :

 

Restrictions:

When the surface of the material at the temperature above 40 Degree ,can't  be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.

 
Main Technology Data: Standard: GB/T14683-2003 

NO.

 Item

 Data

1

Type

Acetoxy

 2

Density g/cm3

0.98

 3

Capacity movement

±30%

 4

Skinning time

5-15 minutes

5

Drying time(2mm/h)

8-10

6

Drying(4mm/h)

18-22

 7

Max. Tensile strength

1.3

8

Hardness shore

21±2

9

Elongation at Break(%)

≥500

10

Modulus Mpa(100%)

0.60

11

Application temperature

-20 to +40

12

Temperature resistance

-50 to +100

13

adhesive

OK

14

Weatherproof

OK

15

Cold-hot adhesive

OK

16

Under water adhesive

OK

17

Elastic Recovery Ratio

96

18

 Mass-loss Rate

35

Skin drying time and fully drying time under: 23 and 50% humidity

 
Construction Method:
Please do adhesion test or compatibility test to assure the applicability of product;

Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured;  Please keep ventilate for the construction site.
 
Safety


 Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;  Silicone sealant will not release any harmful substance and not be harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
 
Warranty


As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.  We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering. 

Useage:


 

bigPhoto
 Mr. Daphne Ho

Tel: 86-757-29261001
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Foshan shunde kaya silicone co. ltd [China (Mainland)]


Business Type:Manufacturer
City: Foshan
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (139)