Ourdoor Decoration Structural Silicone Sealant Non - Toxic Ani - Mildew AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Ourdoor Decoration Structural Silicone Sealant Non - Toxic Ani - Mildew

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Ourdoor Decoration Structural Silicone Sealant Non - Toxic Ani - Mildew

<str

Ourdoor Decoration Structural Silicone Sealant Non - Toxic Ani - Mildew

Features

One-component, drying at neutral room temperature, high strength building structure silicone sealant, Excellent weatherproof ,service life near 30 years under normal climate conditions. No need primer under normal conditions. Good adhesion for most building materials; Good compatibility with other neutral silicone structure sealant.

Main Purpose:

Use for structure's assembly of glass curtain wall. It can sealing the glass and metal's surface to a single assembly components directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design; It's suitable for the insulating glass structural's second layer's sealing. The site that particularly high requirements on the sealing performance, and multi-purpose;

Restriction of Usage:

Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

Main Technology Data:

Performance		Standard	Measured Value	Testing Method	Performance	Standard	Measured Value	Testing Method
Slumpability	Horizontal	Not change shape	Not change shape	GB/T 13477	Tensile proper(MPA)at 90	≥0.45	0.87	GB/T 13477
Slumpability	Vertical(mm)	≤3	0	GB/T 13477	Tensile proper(MPA)at 30	≥0.45	1.65	GB/T 13477
Pot life when 20Mins		≥10	3.3	GB/T 13477	Tensile proper(MPA)after flooding	≥0.45	0.99	GB/T 13477
Skin time(Hours)		≤3	1.2	GB/T 13477	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Hardness (HsA)		20-60	43	GB/T 531	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Thermogravimetry (%)		≤10	4.2	GB/T 16776	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Tensile proper(MPA)in standard condition		≥0.60	0.99	GB/T 13477	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Storage	9 months shelf life if stored below 27 in cool and dry place after production.