Sanitation Facility Sealing Structural Silicone Sealant  Aluminum Bonding

Features

one part, high performance silicone sealant with ultimate tensile strength, mechanical properties for curtain wall, Total Vision System (TVS) and architectural applications. It has very good weathering resistance, durability, sealing and bonding properties. 

   ( OEM IS Available)
 

Scope Of Application:

1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line 
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
 
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
 
Advantage:   Fast dry,  Easy operation , Excellent adhesion property,  Permanently elastic
 
Glass joint :

 
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and iron;
Cannot be used when the substrate temperature is under 6or above 40.
 
Main Technology Data: Standard: GB/T14683-2003 

 
Restriction of Usage:   
1, Unsuitable used on the material's surface that leaking grease, plasticizer or solvent.  
2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture 
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline substances joints sealing.
6, Unsuitable for construction on the material's surface that the temperature lower 6 or higher than 40.
 
Construction Method:
Please do adhesion test or compatibility test to assure the applicability of product;

Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured;  Please keep ventilate for the construction site.
 
Safety
 Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;  Silicone sealant will not release any harmful substance and not be harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
 
Warranty
As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.  We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering. 
 
Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.
 
Attention: 
Information published in this instruction is correct. However, but no means can it be considered 
and absolute guarantee, as usage and application of the product in accordance with the instruction given
 and success in application is beyond our control and is depend on many factors. Customers should have
 a good knowledge of product and make independent judgments of optimal usage before application.
 
Useage: