|
Foshan shunde kaya silicone co. ltd
|
Gold Index: 7314
Construction Latasil Tile And Stone Sealant For Concrete Joint
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Construction Latasil Tile And Stone Sealant For Concrete Joint
<s
Construction Latasil Tile And Stone Sealant For Concrete Joint
Features
1, One-component, drying at neutral room temperature, excellent construction silicone sealant;
2, Does not contain plasticizing agent the small inert molecular components in the formulation. No pollution for marble, granite and other porous materials; the sealing and decorative effect is better than general silicone sealant. Make up for the shortcomings of the pollution from ordinary silicone sealant.
3, Good adhesion to all kinds of marble, granite, cement board material, will not change for the invasion of wind, snow and rain, effectively guarantee the adhesive sealing effect.
4, Excellent weather resistant, Good anti ultraviolet ability;
5, Good compatibility with other neutral silicone sealant.
Application
1, Use for dry hanging stone curtain wall engineering and precast cement engineering joint sealing.
2, Use for the bonding and sealing of ceramics engineering.
3, Use for stone and other materials such as glass, metal, plastic joints sealing.
Construction Guide:
1, Must use solvents such as toluene or acetone, keep the interface clean and dry.
2, As to the use of a primer to enhance its adhesion, when the primer is dry before construction. 3, Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites in need, but make sure the tape not to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to achieve the beautiful appearance.
Restrictions:
When the surface of the material at the temperature above 40 , can't be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.
Specification:
|
NO. |
Item |
Data |
|
1 |
Material |
silicone |
|
2 |
Density (g/cm3) |
0.94 |
|
3 |
Capacity movement |
±30% |
|
4 |
Skin form time |
8-10 minutes |
|
5 |
Curing Rate (2mm/h) |
6-10 |
|
6 |
Drying (4mm/h) |
24-28 |
|
7 |
Max. Tensile strength |
1.3 |
|
8 |
Hardness shore A |
22±2 |
|
9 |
Elongation at Break (%) |
≥600 |
|
10 |
Modulus Mpa (100%) |
0.55 |
|
11 |
Application temperature |
-20°C to 40°C |
|
12 |
Temperature resistance |
-50°C to 100°C |
|
Foshan shunde kaya silicone co. ltd [China (Mainland)]
Business Type:Manufacturer |
