Non - Corrosive Neutral Cure Silicone Sealant Water Tight For Aquariums AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Non - Corrosive Neutral Cure Silicone Sealant Water Tight For Aquariums

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Non - Corrosive Neutral Cure Silicone Sealant Water Tight For

Non - Corrosive Neutral Cure Silicone Sealant Water Tight For Aquariums

Suitable for:
General glazing and weather sealing in curtain wall and building facades. Glazing weatherproofing
movement joint and sealing the joint of non-structural curtain wall.

Features:
Excellent contact change and extrusion ability
Neutral curing and non-corrosive
Excellent adhesive ability and weatherproof capability
Superior tensile and compression restoring ability

Application:
l Thoroughly clean surfaces prior to applying sealant

Main Purpose:
Use for structure's assembly of glass curtain wall. It can sealing the glass and metal's surface to a single assembly components directly. It can meet the requirement of fully-hidden or semi-hidden frame curtain wall design; It's suitable for the insulating glass structural's second layer's sealing. The site that particularly high requirements on the sealing performance, and multi-purpose;

Restriction of Usage:
Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilatedplaces, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

Main Technology Data:

Testing Item		Standard
Sagging degree	Vertical place, mm	≤3
Sagging degree	Horizontal Place	Not change shape
Extrusion performance, s		≤10
Tack free time		≤3
Hardness, hsA		20~60
The Tensile property(MPA)at 23 Tensile strength in adhesion(%)		≥100
Tensile strength in adhesion, Mpa	Normal condition	≥0.60
	90	≥0.45
	-30	≥0.45
	After founder	≥0.45
	Tensile property(MPA)after flooding and UVA irradiation	≥0.45
	bond damage area,%	≤5
Thermal aging	Thermogravimetry(%)	≤10
	Chap	No
	pulverization	No

Standard: GB16776 - 2005

Jointing show:

Estimated amount of use: Please see following form of estimated amount of various joints:

Specification	Width(6mm)	Width (9mm)	Width(12mm)	Width(15mm)	Width(18mm)	Width(21mm)	Width (24mm)
Thickness(6mm)	Length(8.3m)	Length (5.5m)	Length(4.2m)	Length(3.3m)	Length(2.8m)	Length(2.4m)	Length (2.1m)
Thickness(9mm)		Length (3.7m)	Length(2.8m)	Length(2.2m)	Length(1.8m)	Length(1.6m)	Length (1.4m)
Thickness(12mm)			Length(2.1m)	Length(1.7m)	Length(1.4m)	Length(1.2m)	Length (1.0m)

Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.

Our factory: