Post Offer Free
Foshan shunde kaya silicone co. ltd  

Gold Index: 7314

You are here: home  > Organic Acetoxy Silicone Sealant Industrial Assembly And Installation Operations

Organic Acetoxy Silicone Sealant Industrial Assembly And Installation Operations 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: AIA-1

Organic Acetoxy Silicone Sealant Industrial Assembly And Installation Operations
 
Characteristics:

Organic Acetoxy Silicone Sealant Industrial Assembly And Installation Operations

 

Characteristics:

One - component, acid, acetic acid type room temperature curing silicone rubber glass; Fast curing speed, good adhesion, extrusion is good, easy to use, has excellent weatherability weather aging;

 

Main uses:

For glass, aluminum alloy, plastic steel windows and doors, ceramic, non assembly oily Wood etc.;
Powder coated aluminum must be solvent completely remove wax coating.

 

Construction Guide:

Must use solvents such as toluene or acetone, keep the interface clean and dry. As to the use of a primer to enhance its adhesion, when the primer is dry before construction. Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites  in need, but make sure the tape not to touch the surface of construction will be. Before the gum is  solidified, trimming immediately, in order to achieve the beautiful appearance.

 
Advantage:   Fast dry,  Easy operation , Excellent adhesion property,  Permanently elastic
 
Glass joint :

 
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and iron;
Cannot be used when the substrate temperature is under 6or above 40.
 
Main Technology Data: Standard: GB/T14683-2003 

NO.

 Item

 Data

1

Type

Acetoxy

 2

Density g/cm3

0.98

 3

Capacity movement

±30%

 4

Skinning time

5-15 minutes

5

Drying time(2mm/h)

8-10

6

Drying(4mm/h)

18-22

 7

Max. Tensile strength

1.3

8

Hardness shore

21±2

9

Elongation at Break(%)

≥500

10

Modulus Mpa(100%)

0.60

11

Application temperature

-20 to +40

12

Temperature resistance

-50 to +100

13

adhesive

OK

14

Weatherproof

OK

15

Cold-hot adhesive

OK

16

Under water adhesive

OK

17

Elastic Recovery Ratio

96

18

 Mass-loss Rate

35

Skin drying time and fully drying time under: 23 and 50% humidity

 
Restriction of Usage:   
1, Unsuitable used on the material's surface that leaking grease, plasticizer or solvent.  
2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture 
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline substances joints sealing.
6, Unsuitable for construction on the material's surface that the temperature lower 6 or higher than 40.
 
Construction Method:
Please do adhesion test or compatibility test to assure the applicability of product;

Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured;  Please keep ventilate for the construction site.
 
Safety
 Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate;  Silicone sealant will not release any harmful substance and not be harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
 
Warranty
As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System.  We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering. 

Attention: 
Information published in this instruction is correct. However, but no means can it be considered 
and absolute guarantee, as usage and application of the product in accordance with the instruction given
 and success in application is beyond our control and is depend on many factors. Customers should have
 a good knowledge of product and make independent judgments of optimal usage before application.
 
Useage:

bigPhoto
 Mr. Daphne Ho

Tel: 86-757-29261001
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Foshan shunde kaya silicone co. ltd [China (Mainland)]


Business Type:Manufacturer
City: Foshan
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (139)