|
Foshan shunde kaya silicone co. ltd
|
Aluminum - Plastic Acetoxy Silicone Sealant Plate Curtain Wall Bonding
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Aluminum - Plastic Acetoxy Silicone Sealant Plate Curtain Wall Bonding
Features
<p
Aluminum - Plastic Acetoxy Silicone Sealant Plate Curtain Wall Bonding
Features
one part, high performance silicone sealant with ultimate tensile strength, mechanical properties for curtain wall, Total Vision System (TVS) and architectural applications. It has very good weathering resistance, durability, sealing and bonding properties.
Easy to use,one-part,no mixing required.Can be dispensed with an ordinary caulking gun. Cures to a strong,flexible seal capable of withstanding movement in and around the joint. Acetic Cure.Can be applied in any season. Outstanding weatherproofing abilty,resisting to ultraviolet ray,ozone,snow,or temperature extremes.
Non-slumping;can be used in vertical and overhead joints.
Typical Use
For Total Vision System (TVS).
Aquarium, big fish tank and general decorative usages.
Skylinghts, canopies and general glazing.
For butt-joints and corner joints.
For special architectural glazing.
Non-oily wood and some other construction materials.
Advantage: Fast dry, Easy operation , Excellent adhesion property, Permanently elastic
Instruction:
Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Glass joint :
Restriction of Usage:
Cannot be used as structural sealant;
Not compatible with the materials of grease or exudation;
Unsuitable for airproof location, for it requires absorbing moisture in air to cure;
Unsuitable for frosty or moist surface;
Unsuitable for continually flooding or entire-year moist place;
Corrosive to the materials of concrete, porosint stone, zinc and iron;
Cannot be used when the substrate temperature is under 6or above 40.
Main Technology Data: Standard: GB/T14683-2003
|
Performance |
Standard |
Measured Value |
Testing Method |
Performance |
Standard |
Measured Value |
Testing Method |
|
|
Slumpability |
Horizontal |
Not change shape |
Not change shape |
GB/T 13477 |
Thermogravimetry(%) |
≤10 |
7.5 |
GB/T 13477 |
|
Vertical(mm) |
≤3 |
0 |
GB/T 13477 |
Tensile Modulus Mpa |
>0.4 |
0.51 |
GB/T 13477 |
|
|
Extrusion ml/min |
≥80 |
400 |
GB/T 13477 |
Tensile proper |
No damage |
No damage |
GB/T 13477 |
|
|
Skin time min |
≤180 |
12 |
GB/T 13477 |
Tensile recovery rate |
≥80 |
94 |
GB/T 13477 |
|
|
Hardness(HsA) |
20 - 60 |
27 |
GB/T 531 |
Storage |
9 months shelf life if stored below 27 in cool and dry place after production. |
|||
Restriction of Usage:
1, Unsuitable used on the material's surface that leaking grease, plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline substances joints sealing.
6, Unsuitable for construction on the material's surface that the temperature lower 6 or higher than 40.
Construction Method:
Please do adhesion test or compatibility test to assure the applicability of product;
Please clean the joint with solvent such as toluene, xylene and acetone, then keep it dry;
Tape is used to cover the edge of the joint to make silicone sealant sealed perfectly, but it cannot contact the sealed surface;
Cut the nozzle at the desired size. Keep good contact between the silicone sealant and joint, and remove the tape before the sealant is cured; Please keep ventilate for the construction site.
Safety
Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate; Silicone sealant will not release any harmful substance and not be harmful to health after cured;
Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
Warranty
As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.
The purchase of channels and prices:
The user can purchase from our area's agent directly to ensure the quality and authenticity of products.
Estimated amount of use: Please see following form of estimated amount of various joints:
|
Specification |
Width
Foshan shunde kaya silicone co. ltd [China (Mainland)]
Business Type:Manufacturer |
