Window Installationt Transparent Silicone Sealant Strength And Flexibility AIA-1 manufacturer from China Foshan shunde kaya silicone co. ltd

Window Installationt Transparent Silicone Sealant Strength And Flexibility

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Window Installationt Transparent Silicone Sealant Strength And Flexibility

Window Installationt Transparent Silicone Sealant Strength And Flexibility

Features
High Performance Neutral Silicone Sealant is a high performance multi-purpose single component neutral curing silicone sealant, forming a high strength, cold-resistant, heat-resistant, water-proof, corrosion resistant, excellent UV aging-proof elastomer, good adhesion to most building substrate such as glass ,metal, stone, coated surface without any primer. Apply to door and window installation, glass glazing, metal bonding, interior and exterior sealing etc.

Main Purpose:

One component, good extrusion ability, easy to use; Neutral curing, non-corrosive and non-irritating odor Wide range of adhesion, good adhesion to most building substrate and no primer; Good strength and flexibility, good resistance to cracking and displacement; Excellent weather resistance, Remarkable high and low temperature durability, can maintain long water and air tightness;

Restriction of Usage:
Unsuitable used on the material's surface that leaking grease, plasticizeror solvent. It should be used in the ventilated places, because the silicone sealant need to absorb the moisture in the air for drying. Unsuitable used for frost or wet surface. Unsuitable used for construction on the material's surface that the temperature lower 6 or higher than 40. Unsuitable used for construction on the unclean and uptight substrate's surface. Unsuitable used for the interface of ground that bears the structural strength or the ground damage by excessive physical.

Main Technology Data:

Performance		Standard	Measured Value	Testing Method	Performance	Standard	Measured Value	Testing Method
Slumpability	Horizontal	Not change shape	Not change shape	GB/T 13477	Tensile proper(MPA)at 90	≥0.45	0.87	GB/T 13477
Slumpability	Vertical(mm)	≤3	0	GB/T 13477	Tensile proper(MPA)at 30	≥0.45	1.65	GB/T 13477
Pot life when 20Mins		≥10	3.3	GB/T 13477	Tensile proper(MPA)after flooding	≥0.45	0.99	GB/T 13477
Skin time(Hours)		≤3	1.2	GB/T 13477	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Hardness (HsA)		20-60	43	GB/T 531	Tensile proper(MPA)after flooding and UVA irradiation	≥0.45	1.05	GB/T 13477
Thermogravimetry (%)		≤10	4.2	GB/T 16776	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Tensile proper(MPA)in standard condition		≥0.60	0.99	GB/T 13477	Tensile proper(MPA)at 23 Tensile strength in adhesion(%)	≥100	187	GB/T 13477
Storage	9 months shelf life if stored below 27 in cool and dry place after production.

Standard: GB16776 - 2005

Note: The actual usage amount maybe different due to the joint design, installation position of pad material, repairing skill and wastage in application.

Attention: Information published in this instruction is correct. However, but no means can it be considered and absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.